(UK) Replacement seals for Capo/Futura clutch system

Aprilia Caponord ETV1000 Rally-Raid & RST Futura clutch system master & slave sealsRecently while visiting the AF1 Futura forum, I saw an interesting thread about replacement clutch master / slave seals (common to both Futura & Caponord) sourced in the UK at a very good price and thought the information well worth sharing here.

The thread was started by a UK owner – Corsehf (Andy) in which he quotes replacements for all the  master / slave cylinder seals from one supplier. Seal details and individual prices are:

  • Master Cylinder Seal – Lever End: SU12-6.9-4DE-EP-S-DK101 – £2.50
  • Master Cylinder Seal – Spring End: SU12-5.2-3.8-EP-S-DK106 – £2.50
  • Clutch Slave Cylinder Main Seal: SU112078-018DE-EP-S-DK101 – £2.79
  • Clutch Slave Cylinder Piston Pushrod Seal: SS8-16-7-SC – £1.60

That’s a total of £9.39 + Vat = £11.27 plus package & post. So for somewhere around the cost of one genuine slave cylinder seal, we can buy ALL the seals needed for a full clutch system rebuild. Not bad in my books! If you’re interested, call Rebecca Pattinson at FPE Seals on 01325 282732 or email: [email protected]  If you do decide this is for you, then please drop by the thread and offer Andy your thanks …. he’s just saved you a pocket full of money!

So I’ll end with a big thank-you to Andy, then get a set on order and nip into the barn to dig out that old master cylinder and finally get it re-coated and re-sealed, then swap it for the brake fluid damaged one on the Raid ….. oh happy days! That things been bugging me for years.

Clutching at straws …..

Aprilia Caponord ETV1000 Rally-Raid DOT5.1 clutch & brake fluidClutch slave cylinders/seals and brake fluid can be almost as emotive as good old engine oil, everyone has an opinion. Well I’ve just changed brake/clutch fluid after about 15 months, usually I’d do it every 6 months or so, but somehow I’ve ended up getting a bit lax and let it slide. So for what it’s worth, here’s how things have worked out on my own Capo over the years.

Aprilia Caponord ETV1000 Rally-Raid clutch master cylinder DOT5.1 fluidI think everyone will agree that it’s the clutch fluid that takes the most punishment, followed by the rear brake. So here’s a couple of photographs of the inside of the master cylinder straight after opening it and a comparison of the fluid drawn off, with straw colour of new fresh oil from a sealed container. No black residue in the master cylinder and only a slight colour change in the oil with almost no cloudiness. The fluid drained from both front and rear brakes was almost like new, but it’s nice to keep the fluid fresh anyway.

Aprilia Caponord ETV1000 Rally-Raid DOT5.1 brake & clutch fluid In comparison the oil I used to drain at 6-12 month intervals from the clutch was cloudy with black residue in the master cylinder and the rear brake was frequently amber in colour, only the front brakes seemed to show little degradation – all this was while using DOT4!

Todays oil is DOT 5.1 and has done 27,143 miles over 15 months

I’ve been using DOT5.1 now for the past five years and the first (10 year 44K miles) clutch slave seal was replaced in late 2013, not because it failed, but because it seemed to be letting a little air back into the system after long (24Hr+) runs – enough to give an extra 4-5mm or so of free play at the ball end of the lever otherwise it seemed fine in normal day-to-day use. Seal replacement was purely precautionary. The replacement seal has been used with DOT5.1 its entire life (2½ years 45K miles) and is showing no sign of leakage or air ingress. So to date it’s cost me one seal (€17) versus going out and buying a €90 aftermarket cylinder … I know which mast I’m nailing my colours to!

Aprilia Caponord ETV1000 Rally-Raid clutch master cylinder window bubbleAnd finally ….. always ALWAYS make sure the level of fluid in the reservoir is right. It is so damn easy to overfill this one. My prefered method is to drain off most of the reservoir fluid once the system is bled (don’t expose the ports) then refit the rubber bellows and use a syringe to inject fluid back in while watching the bubble. Leave quite a big bubble showing, because when you screw down the cap the volume (and bubble) shrink a little.