Access at last ….. update

Aprilia Caponord ETV1000 Rally-Raid ECU ELM327 Bluetooth OBD-II and TuneECUFurther to the last post about accessing the Caponord ECU, I have added a couple of new pages under the ‘Aprilia Caponord Rally-Raid / ECU’ drop-down in the menu. A further page will be written shortly I hope. Apologies if they seem to ramble somewhat, but a terrible week, a stint in hospital and some rather strong pain meds have left me a little tired and woolly-headed. But I needed to get this stuff down before I forgot it all again!

I guess I also need to say that although I’m 100% for innovation, curiosity and experimentation ….. if you do decide to experiment with your own ECU and ultimately turn it into a rather decorative door-stop, please do not come running in this direction! The info I provide is not verified and could quite easily have typos –  make sure you are 100% confident about what you are doing and that you thoroughly understand the consequences if you get in too deep. If you are unsure about something then feel free to drop me a line …. I’ll happily try to assist.

Access at last ……

Aprilia Caponord ETV1000 Rally-Raid ECU connection OBD-II TuneECU It has been a long time coming … and I mean a looooong time. Think a decade! Back before we had TuneECU a few Capo owners pooled thoughts on how to get access to the ECU and read its contents, but we all gave up when TuneECU came along because it did it all for us – for (almost) free. Now however there is a real need for that access if the new dashboard display is to do what it is supposed to, and that has been the hurdle of hurdles to get across. If I am totally honest this problem alone was guaranteed to bring the project to a grinding halt if nothing was. So for the past few weeks, I put the display to one side and concentrated on cracking the ECU.

Well I’m not only chuffed, I am totally blown over backwards because as of this afternoon, I can finally access and interrogate the ECU independently of anyone elses equipment or software – ECU serial number, map number and all the sensor parameters plus self test functions and TPS reset! I’ve still got work to do interpreting some of the data, but that is not such a big issue and should be finished tomorrow.

Tonight though, I think a cold beer or two are in order!

TuneECU (Android) update to V2.2

TuneECU Andriod app V2.2 - Aprilia Caponord ETV1000 Rally-Raid Sagem ECUStop the Bus (or your Caponord) and grab yer smartphones again, TuneECU has just been updated to V2.2 ………… worthy of mentioning? Oh Yes! Alaine has addressed the poor connection (cable) AND the screen freezing if you swiped it when logging issue. Now TuneECU connects to the Capo quick as you like, just as it used to. I tried it numerous times and never once had a problem – fantastic! All-in-all a positive step forward …..

TuneECU App – Review

Aprilia Caponord ETV1000 Rally-Raid - TuneECU Android AppA week ago I downloaded the TuneECU Android App, spent a few minutes scrolling through the screens, then sat back and waited for Mr Postman to deliver a USB3 OTG cable for the Samsung Note 3 and a Bluetooth module from Ebay.

Here we are a whole week later and I’ve used the App successfully with both connection methods. Indeed the App is stable and remarkably quick and easy to set up connections and seems to take no longer than its PC sibling to communicate with the ECU. I didn’t experience any drop-out when starting the engine with either method and map Read/Dowload via cable seemed on a par with my netbook. So far, so good…….

……. Now for the downside.

Those of you that have used TuneECU(PC) will be familiar with the three modules it contains – Map Edit, Diagnostics and Tests and I ask you which of these modules are likely most useful in a day-to-day situation? In my books that’s the Diagnostics/Tests ….. why would I want to remap a bike from a smartphone for a start, let alone mess with mapping while out and about commuting to work or heading off for a summer jolly. Mapping is best done at Dyno time, in a workshop and let’s face it, once done probably won’t need revisiting for a long time, only engine/exhaust mods or ECU replacement come to mind.

So my wish list is for an App with full Diagnostics/Tests, the stuff that may well help me at the roadside, that will show me an intermittent coil when the ECU hasn’t triggered the EFI light or generated a code and other information that the simple dashboard diagnostics just doesn’t display.

 

Unfortunately it’s here that the App falls flat. As much as I swiped and tapped I couldn’t find a screen to show me the sensor data – Injectors, Coils, Air Temp, O2 sensor, Barometric etc . In fact the display doesn’t even show me Neutral, Fan or Side-stand …. All familiar sights on the PC version. So I dropped the author Alaine an email. And this was his response.

There is no sensors page shown in the App, maybe this will be added in the future. The Fan and Side-stand lamps are not written into the software and yes there is a bug with the O2 graphic display. He hasn’t come back to me yet about the missing Neutral lamp.

So that’s it …. An interesting novelty App, unfortunately nothing really useful to offer as a diagnostics tool while out on the road ……. For now the cable and Bluetooth module can find a place on a shelf somewhere, while the trusted Asus notebook keeps me company with TuneECU 1.97 doing what it’s always done – and doing it very well!

I’ll end by saying that since the Capo was ported to TuneECU back in October 2010, I’ve used it extensively even though I still have TuneBoy on the netbook. Alaine is to be applauded for his work in bringing a great piece if software to the bike world – for free. So I feel uneasy writing a negative review of the App, but in the end I’ve tried to be as honest as I can about its abilities with regards to the Caponord. Maybe it’s having far more success among the Triumph fraternity, I don’t know.

TuneECU for Android is now out

TuneECU for Andriod on Google Play StoreOn the 15th September 2014 the eagerly awaited TuneECU for Android app was rolled out on Google Play Store priced at €9.99. It doesn’t currently support reading or reprogramming of maps through Bluetooth only via cable, but it is version 1 so this may be added at a later date. Either way, it’ll make a handy pocket diagnostics tool and save luggage space leaving the notebook at home!  Here’s a link to the TuneECU webpage where you can read more about what’s needed to get it working on your Caponord.

It might be nice to look at putting together a fully waterproof Bluetooth module/cable that can be left permanently attached to the ECU, maybe with a remote switch in the luggage tray to power it on/off ….. another winter project! 😀

 

TuneECU Andoid app in the pipeline!

TuneECUI just popped over to the TuneECU website and saw a ‘NEW’ one-liner tucked away below the latest TuneLibrary.dll download link on the front page ……. I almost missed it, did a double take and followed the link in a flash ….. and I’m glad I did!  It certainly looks like those clever folks have been busy, three nice screenshots of an Android TuneECU app. Shown below courtesy of Tom.

So I fired off an email asking for permission to use the screenshots and to enquire if the software would work with the Caponord and although not 100% sure at the moment, Tom’s pretty sure it will …. he just needs more information back from the programmer. So bookmark tuneecu.com and keep watching!

Making connections

Aprilia Caponord ETV1000 Rally-Raid ASL 606-05PC-HE connectorHooking up the netbook to the ECU when datalogging has always been a pain. Seats off, fumble around for the Molex connector, run the cable under the seats, refit the seats …… and away we go. So when I saw a neat little MIL style connector that Andy has fitted to his Capo, I couldn’t help asking about it.

Turns out it’s made by Deutsch Autosport and they make a whole range of high quality connectors specifically for the motorsport industry. Here’s a link to the catalogue. Anyway, all-round nice guy that he is, Andy made me a chassis socket and plug assembly with 300mm of loom at each end. Not only that, he popped them in the post to Italy … and they arrived a couple of days ago. And I must say ….. WOW! ….. beautifully machined and fully waterproof with a nice machined cap to keep the greeblies out.

So now I’ve reworked my old TuneBoy cable and installed the connector on the dash. I’ve used shielded cable back to the original molex plug to reduce interference on the data lines and it all works fine.

So it only remains to say a big thank you to Andy for doing this for me. I owe you one! Now if you’re thinking of hot-footing it over to the AF1 forum to send Andy a PM – don’t. This was a one-off kindness and he won’t be making any more, so please don’t ask.

A trundle up to Silverstone

Force_IndiaWhile over in the UK I popped over to Sahara Force India Formula 1 team at Silverstone to meet up with Andy (Beasthonda) from the AF1 forum. We’ve been exchanging emails on and off for months now and this was a great chance to put a face to the name.

Aprilia Caponord ETV1000 Rally-Raid ECU Oscilloscope TuneECUI took along my netbook and OBD cable and remapped his Capo while Andy hooked a patch-box and oscilloscope into the instrument panel wiring loom so we could accurately measure a particular signal from the ECU. It was certainly a whirlwind exercise – all done with one eye on the storm clouds brewing overhead! Everything went smoothly and afterwards Andy gave me a guided tour of the team headquarters, it was fantastic. So I’d like to thank Andy once again for his kindness, hopefully we’ll meet again when I’m next over on the Capo. Cheers!

UPDATE: See the foot (bottom right) of the picture above? A fine example of a foot I think you’ll agree …. but it’s not mine and it’s not Andy’s. It belongs to Rob Ashworth who tried desperately to get out of the shot but didn’t quite make it. Rob in fact supplied the oscilloscope and twiddled the knobs in a flurry of practised professionalism. As they say, better late than never ……. Rob, thank you for your assistance and it was a pleasure chatting to you.

 

TuneECU update

Not a major update, more a bug fix and more Triumph map support added. TuneECU is still the ECU software of choice for the Aprilia Caponord and hasn’t added any new features for us since the beginning. Each new version has primarily focused on new Triumph models and addressed a few minor bugs – only one of which has been relevant to the Caponord so far.

I do like to load the new versions and compare functionality with an older trusted version just to make sure that nothing untoward has crept in with each new release as far as the Capo is concerned. Oh and as I write this, I’ve just realised – it was two years ago this month that the Caponord/Futura were added to the bikes that TuneECU support ….. wow time flies! To download the new version and maps, click on the ‘TuneECU’ link on the menu bar.

Moto-logger update

Scroll down for the video!

It’s been a couple of months since I posted an update on the ‘Moto-logger’, mainly because other than using it, I didn’t update it! During that time notes and thoughts of improvements to the layout, function or stability were scribbled on bits of paper and sprinkled around the PC, waiting for a rainy day.

Last week it rained.

So here’s a screen shot of V1.7, now with a left-hand side bar and two selectable displays. One for the raw GPS data being received and the other ( a bit of a gimmick admittedly) is a ‘fuel calculator’. The Capo doesn’t register road speed in the ECU unlike the Triumph’s … so it made me wonder if it were possible to calculate fuel usage and tank contents from GPS data and the pulse width of the injectors – the duration the injector is open and passing fuel to the engine.

So here it is .. and it works. Well the needles move, the numbers jump around and the LED blinks with 5 litres remaining, so hey, it’s a runner! Clicking either gauge resets the calculators and ‘fills’ the tank to 25 litres. Turning off the bike/software doesn’t lose the calculations either, so taking a quick road-side slurp of coffee doesn’t mess up the figures. Happy days indeed!

V1.7 Improvements

  • Calculate MPG and tank volume remaining
  • Calculate Air Density
  • Calculate corrected EC80/1269 power output based on barometric pressure and air temperature.
  • Display received GPS sentences 
  • Display and log GPS time
  • Cleaned up the code (ish!)
  • Took out some bugs and improved stability.

Still to do …

  • Learn more and improve the code efficiency!
  • Add better file handling to prevent overwrites and crashes when calling a missing data file
  • Add a ‘Range’ …. miles to go, to the calculator (yes another gimmick!) – Done!
  • Temporarily log pulse width. I want to see a snapshot of what its range is. – Done!
  • Real-time plot display? – And done!!

[kml_flashembed publishmethod=”static” fversion=”8.0.0″ movie=”https://www.moto-abruzzo.net/wp-content/uploads/2011/11/Moto-logger5_controller.swf” width=”640″ height=”378″ targetclass=”flashmovie” quality=”best” base=”https://www.moto-abruzzo.net/wp-content/uploads/2011/11/” fvars=”autostart=false;thumb=FirstFrame.png;thumbscale=45;color=0x1A1A1A,0x1A1A1A”]

Get Adobe Flash player

[/kml_flashembed]