Tag Archives: airbox

Take a deep breath ……..

With plans a-foot to assemble a big-cc motor for the Capo, it was time to cast an inquisitive eye over the airbox snorkel, that ugly rubber protrusion at the front of the airbox, sucking in hot air from on top … Continue reading

Posted in Engine | Tagged , , , , , , , , , , , , , , , | 2 Comments

Airbox crankcase vent – Mk2

With the velocity stacks and snorkel measured up and squirreled away in CAD, it was time to rebuild the airbox …… except billy-butter-fingers here, went and knocked the airbox base off a chair onto the floor – not far – … Continue reading

Posted in Engine | Tagged , , , , , , , , , , , | Comments Off on Airbox crankcase vent – Mk2

Hybrid velocity stacks

If all goes to plan, later this year the second Rally-Raid that’s currently being rebuilt, will finally get a motor installed. The plan is to use a big-bore motor …. an 1,103cc in place of the standard 998cc. The compression … Continue reading

Posted in Engine | Tagged , , , , , , , , , , , , , , , , , | Comments Off on Hybrid velocity stacks

Airbox breather update – (almost) a year on

Just gave the Capo motor a service. No drama, everything went according to plan. I just thought I’d share a couple of pics of the inside of the airbox – with the modified breather – straight after the air-filter assembly … Continue reading

Posted in Engine | Tagged , , , , , , , , , , , | Comments Off on Airbox breather update – (almost) a year on

Oil in the Airbox …..fixed!

You may (or may not!) have read the post a couple of months ago – Fixing a few Capo niggles. That was where between Continental trips, the original air-box molded connection for the crank-case vent was drilled out and a … Continue reading

Posted in Engine | Tagged , , , , , , , , , | 2 Comments